= Monitor Calibration

Calibrating my monitor (an Iiyama Prolite H481S) I had quite a hard time - as I was totally clueless how to find proper settings.

http://www.normankoren.com/makingfineprints1A.html was a start and also http://www.pcbypaul.com/software/monica.html helped - especially providing a sensible test image.

I followed the advice of normankoren and decided to set the monitor back to factory settings and use the „NVIDIA X Server Settings“ tool to do the adjustments.

I did the following - having the screenshot (see below) displayed in 1:1 scale: * set color temperature to „s“ (the monitor manual says that's sRGB) * adjust brightness, so that a dark grey square became just visible within the black square * adjust contrast until the difference between the darkest two areas matched approximately the difference between the lightest two areas * very carefully re-adjust brigthness and contrast a bit to improve the two criteria above * adjust gamma, so that „line 693“ in the screenshot has a light blue background * voila!

Settings that seem to be ok for me are

	Brightness	Contrast	Gamma
Red:	0.428		-0.39		0.846
Green:	0.384		-0.36		0.790
Blue:	0.428		-0.39		0.749

with 7500 K ("2"):

Red:	-0.15		-0.007		1.380
Green:	-0.27		0.048		1.312
Blue:	-0.15		-0.007		1.380
or
Red:	-0.08		-0.33		1.380
Green:	-0.41		0.116		1.986
Blue:	-0.14		-0.12		1.380
or
Red:	-0.06		-0.12		1.380
Green:	-0.41		0.116		1.986
Blue:	-0.14		-0.12		1.380